Due to the fact that all applications are unique and in order to design an optimal weighing or level measurement system, which we can supply as well, we will need to gather information for each individual vessel.
As soon as this basic information has been collected, we can make an estimation of the total initial costs.

To ensure that the design is complete and to accommodate the overall plant needs, we will need to visit the site for a final design inspection.
To optimise your supply chain we would like to make an agreement between our two companies, which clearly defines our commitments to each other.

The design of the weighing and/or levelmeasurement system depends on local certification needs (i.e. explosion proof zones), type of material, vessel height and shape, preferred measurement principle and the practical possibilities to mount the equipment in the vessel.

One thing is for certain: the selected measurement system will provide the best results and confidence.

Our qualified and certified installers will, in cooperation with the technical staff of the plant on site, install the selected sensors and establish the connections between the sensors, measurement transmitter and the communications device. After the local technical staff has provided the equipment with power and the phone line if necessary, we will commission and tune the installed equipment until correct communication with our data-center is established.

If you are interested in our partial or complete VMI solutions and services, LevelMonitor or weighing and level equipment, you can .